• -5%

Ford Ranger Next Gen (2022 on) - Dobinsons Twin Tube Nitro Gas Front Lift - Preassembled Struts

Type: Ranger

Model: Next Gen RA - PU - T6.2

Year: 2022 on

Suspension Type: Coil Spring Front

Front Lift: 50mm

Detail: 4x4 & 4x2 Highrider
Twin Tube Nitrogen Gas charged shock
Preassembled Strutsabsorbers
Wildtrack Models Will Lift 35mm Less Than Stated Due To Increased Factory Ride Height.


The kit contains:

  • 2x Dobinsons Front Coil Springs
  • 2x GS19-108 - Twin Tube Nitro Gas Front Shock absorbers
  • Coil and Strut Assembly with new strut tops SC19-015 - Strut tops

Recommended Upgrades:

  • 1x WA19-594K - Headlight Adjuster
    * Required For Wildtrack Models Only
  • 1x UCA19-224K - Forged Aluminium Upper Control Arms (Pair)
    Adjustable Camber
    Increased Castor
    Excludes Ball Joint - Press Tool Included
    Long Travel
Customise your kit below:
* Front Lift Options
Wildtrack Models Will Lift 35mm Less Than Stated Due To Increased Factory Ride Height.
* Front Load Options
Wildtrack Models Will Lift 35mm Less Than Stated Due To Increased Factory Ride Height.
* Select your upgrades
Upgrade Cost: 0
$885.00
$885.00
$840.75 Save 5%
Tax included
$996.00
$155.25 (18.47%)

* RRP based on "The kit contains" parts only.


The following parts are limited:

  • WA19-594K - Headlight Adjuster

If you are still interested in ordering your kit with these parts please call to confirm the parts are back instock or check to see if we have an ETA on new stock.


Type: Ranger

Model: Next Gen RA - PU - T6.2

Year: 2022 on

Suspension Type: Coil Spring Front

Front Lift: 50mm

Detail: 4x4 & 4x2 Highrider
Twin Tube Nitrogen Gas charged shock absorbers
Preassembled Struts
Wildtrack Models Will Lift 35mm Less Than Stated Due To Increased Factory Ride Height.


Twin Tube Nitro-Gas

Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in house suspension design engineers, Dobinsons 4x4 shock absorbers are designed and tested to perform in the harshest conditions right across the world.

As Dobinsons Spring and Suspension export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter.

Features:

  • Nitrogen Gas Charged
  • Superior Design
  • High Quality Parts
  • Manufacturing Process

Specifications:

  • Direct Bolt-In O.E Replacement
  • 35mm & 32mm Bore Size
  • Double Chromed 18mm Rod
  • 60mm & 51mm Body Size
  • High Quality Fuch's Oil
  • NOK Multi-Lip Seals
  • Teflon Piston Rings
  • Twin Tube Big-Bore Design
  • Vehicle & Weight Specific Valving
  • Natural Rubber Bushings

Important Notes for setting up your Vehicle Correctly:

  • When selecting Springs to suit your lift, please Select Springs only to suit Current "CONSTANT" Loads Front and Rear.
  • Towing Loads are not included in your Constant Load Calculations, as they are not "Constant" Loads.
  • Please do not put Occasional Loads into your "Constant" Load determinations.
  • Selecting a load rating that is too heavy for your setup will result in Poor Flex Off-Road, Compromised Suspension Travel & Rough Ride, and will cause damage to your new shock absorbers and other components by pushing them outside of their intended range.

Please Note:

  • All lift heights stated are estimated lift heights, due to the large number of variables in each different vehicles setup and accessories.

Data sheet

Make
Ford
Model
Ranger
Series
Next Gen Ranger - 2022 on
Brand
Dobinsons
Shock Type
Dobinsons Nitro Gas
Product Type
Front Lift
Lift Height
40-50mm
Related Products ( 16 other products in the same category )
Powered by Trust.Reviews