Mitsubishi Triton MQ MR Dobinsons Nitro Gas Lift Kit

Mitsubishi Triton MQ & MR (03/2015 on) - Dobinsons Twin Tube Nitro Gas Lift Kit

Type: Triton

Model: MQ & MR 5th Generation

Year: 03/2015 on

Suspension Type: Coil Spring Front / Leaf Spring Rear

Front Lift: 30mm

Rear Lift: 30mm

Detail: 4x4
Also Suits 4x2 Highrider
Twin Tube Nitrogen Gas charged shock absorbers


The kit contains:

  • 2x Dobinsons Front Coil Springs
  • 2x GS43-800 - Twin Tube Nitro Gas Front Shock absorbers
  • 2x GS43-801 - Twin Tube Nitro Gas Rear Shock absorbers
  • 1x PB43-1109K - Polyurethane Bush Kit
  • 4x UB59-453-2 - U-bolts
  • 2x Dobinsons Rear Leaf Springs

Recommended Upgrades:

  • Coil and Strut Assembly with new strut tops SC43-005 - Strut tops
  • 2x SK43-063 - Greasable Shackles & 2x SP59-060 - Greasable Shackle Pins
  • 1x WA43-539K - Top Out Stop Kit
    * Recommended To Fit This Kit With All Suspension Kits To Maintain Droop Travel

Optional Upgrades:

  • 1x S43-001 - Tailshift Spacer
    * When Fitting Raised Suspension,a Tailshaft Spacer is Required to Align the Centre Bearing and Prolong Life in Models with a 2 Piece Tailshaft
Customise your kit below:
* Front Load Options
* Rear Load Options
* Select your upgrades
Upgrade Cost: 0
$1,710.00
Tax included
$2,085.00
$375.00
Quantity
 Calculate Shipping Cost

Type: Triton

Model: MQ & MR 5th Generation

Year: 03/2015 on

Suspension Type: Coil Spring Front / Leaf Spring Rear

Front Lift: 30mm

Rear Lift: 30mm

Detail: 4x4
Also Suits 4x2 Highrider
Twin Tube Nitrogen Gas charged shock absorbers


Can Not Exceed 30mm Lift Due to Suspension Geometry Restrictions


Twin Tube Nitro-Gas

Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in house suspension design engineers, Dobinsons 4x4 shock absorbers are designed and tested to perform in the harshest conditions right across the world.

As Dobinsons Spring and Suspension export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter.

Features:

  • Nitrogen Gas Charged
  • Superior Design
  • High Quality Parts
  • Manufacturing Process

Specifications:

  • Direct Bolt-In O.E Replacement
  • 35mm & 32mm Bore Size
  • Double Chromed 18mm Rod
  • 60mm & 51mm Body Size
  • High Quality Fuch's Oil
  • NOK Multi-Lip Seals
  • Teflon Piston Rings
  • Twin Tube Big-Bore Design
  • Vehicle & Weight Specific Valving
  • Natural Rubber Bushings

Important Notes for setting up your Vehicle Correctly:

  • When selecting Springs to suit your lift, please Select Springs only to suit Current "CONSTANT" Loads Front and Rear.
  • Towing Loads are not included in your Constant Load Calculations, as they are not "Constant" Loads.
  • Please do not put Occasional Loads into your "Constant" Load determinations.
  • Selecting a load rating that is too heavy for your setup will result in Poor Flex Off-Road, Compromised Suspension Travel & Rough Ride, and will cause damage to your new shock absorbers and other components by pushing them outside of their intended range.

Please Note:

  • All lift heights stated are estimated lift heights, due to the large number of variables in each different vehicles setup and accessories.

Data sheet

Make
Mitsubishi
Model
Triton
Series
MQ & MR - 03/2015 on
Brand
Dobinsons
Shock Type
Dobinsons Nitro Gas
Type
Full Lift Kit
Lift Height
20-30mm
Related Products ( 16 other products in the same category )