Sale ends in
$3,280.00 -15% $2,788.00
Mounting, differential
SuperPro Differential Drop Kit
This bolt on kit corrects the geometry of the front axles and reducing CV bind at full droop by lowering the front diff approximately 20mm. This kit requires no modifications to the cross member and allows the original bash plate to be refitted.
Suits Lifted vehicles.
The kit is supplied complete with all required spacers, bolts, washers and nuts.
When lifting a vehicle, the Constant Velocity (CV) joints are put on an increased angle, helping to accelerate the wear on the joint and putting additional stress on the CV boots. The added down travel from adding extended shocks can also cause the joint to exceed the maximum operating angle, which causes the CV joints to bind up and cease to operate.
The SuperPro bolt-on kit corrects the geometry of the front axles and CV's by lowering the front diff approximately 25mm.
Reducing the angles on the CV joints can help get them back into the normal operating range, helping to avoid the expensive replacement costs of CV's.
Product Specifications:
- Components Per Product: 1 Bracket, 2 Spacers, Bolts, 2 Washers
Vehicle Applications:
- ISUZU
- D-MAX 2019-ON | D-MAX TFS, RG01 4WD
- MU-X 2021-ON | MU-X UCS, RJ 4WD
- MAZDA
- BT-50 2020-ON | BT-50 TF, RG04 4WD
SuperPro Front Differential Drop Kit to Suit Isuzu D-Max, MU-X and Mazda BT-50 - TRC9015
TRC9015
Mounting, differential
SuperPro Differential Drop Kit
This bolt on kit corrects the geometry of the front axles and reducing CV bind at full droop by lowering the front diff approximately 20mm. This kit requires no modifications to the cross member and allows the original bash plate to be refitted.
Suits Lifted vehicles.
The kit is supplied complete with all required spacers, bolts, washers and nuts.
When lifting a vehicle, the Constant Velocity (CV) joints are put on an increased angle, helping to accelerate the wear on the joint and putting additional stress on the CV boots. The added down travel from adding extended shocks can also cause the joint to exceed the maximum operating angle, which causes the CV joints to bind up and cease to operate.
The SuperPro bolt-on kit corrects the geometry of the front axles and CV's by lowering the front diff approximately 25mm.
Reducing the angles on the CV joints can help get them back into the normal operating range, helping to avoid the expensive replacement costs of CV's.
Product Specifications:
- Components Per Product: 1 Bracket, 2 Spacers, Bolts, 2 Washers
Vehicle Applications:
- ISUZU
- D-MAX 2019-ON | D-MAX TFS, RG01 4WD
- MU-X 2021-ON | MU-X UCS, RJ 4WD
- MAZDA
- BT-50 2020-ON | BT-50 TF, RG04 4WD
$210.00
Tax included
SKU: TRC9015
Mounting, differential
SuperPro Differential Drop Kit
This bolt on kit corrects the geometry of the front axles and reducing CV bind at full droop by lowering the front diff approximately 20mm. This kit requires no modifications to the cross member and allows the original bash plate to be refitted.
Suits Lifted vehicles.
The kit is supplied complete with all required spacers, bolts, washers and nuts.
When lifting a vehicle, the Constant Velocity (CV) joints are put on an increased angle, helping to accelerate the wear on the joint and putting additional stress on the CV boots. The added down travel from adding extended shocks can also cause the joint to exceed the maximum operating angle, which causes the CV joints to bind up and cease to operate.
The SuperPro bolt-on kit corrects the geometry of the front axles and CV's by lowering the front diff approximately 25mm.
Reducing the angles on the CV joints can help get them back into the normal operating range, helping to avoid the expensive replacement costs of CV's.
Product Specifications:
- Components Per Product: 1 Bracket, 2 Spacers, Bolts, 2 Washers
Vehicle Applications:
- ISUZU
- D-MAX 2019-ON | D-MAX TFS, RG01 4WD
- MU-X 2021-ON | MU-X UCS, RJ 4WD
- MAZDA
- BT-50 2020-ON | BT-50 TF, RG04 4WD
TRC9015
Data sheet
- Make
- Isuzu
Mazda - Model
- BT50
D-Max
MU-X - Series
- 3rd Gen - MY 2020 on
Series III - TF - MY 2020 on
UCS40 - Mid 2021 on - Brand
- SuperPro
- Product Type
- Differential Drop
Parts
Specific References
- EAN13
- 9317745842729
Customers who bought this product also bought:
- On sale!
- -15%
Related Products ( 16 other products in the same category )
