Nissan Navara D23, NP300 Coil Rear (08/2014 on) - Dobinsons Nitro Gas Lift Kit 2"

Type: Navara

Model: D23, NP300

Year: 08/2014 on

Detail: 4x4 Single Cab/Dual Cab/Extra Cab, Frontier (USA),
Coil Spring Rear Suspension Models

Due to the Restricted Suspension Geometry, a Maximum of 40mm Lift is Achievable in the Front of this Vehicle.

Pro4x / Pro4x Warrior Will Lift 30mm Less Than Stated Due To Increased Factory Ride Height

Remove OE Coil Spring Insulator and Fit to Dobinsons Coil Spring

Note: Some 2018 Vehicles Have Factory Higher Rear Springs And These Springs Will Provide Approximately 25mm Less Lift Than Stated

Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in house suspension design engineers, Dobinsons 4×4 shock absorbers are designed and tested to perform in the harshest conditions right across the world.

As Dobinsons Spring and Suspension export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter.

Features:

• Nitrogen Gas Charged
• Superior Design
• High Quality Parts
• Manufacturing Process

Specifications:

• Direct Bolt-In O.E Replacement
• 35mm & 32mm Bore Size
• Double Chromed 18mm Rod
• 60mm & 51mm Body Size
• High Quality Fuch's Oil
• NOK Multi-Lip Seals
• Teflon Piston Rings
• Twin Tube Big-Bore Design
• Vehicle & Weight Specific Valving
• Natural Rubber Bushings

The kit contains:

• 2x Dobinsons Front Coil Springs
• 2x GS45-642 - Dobinsons Twin Tube Nitro Gas Front Shock absorbers
• 2x Dobinsons Rear Coil Springs
• 2x GS45-646 - Dobinsons Twin Tube Nitro Gas Rear Shock absorbers

Recommended Upgrades:

• 1x SE45-523K - Sway Bar Extension & Brake Extension Bracket

Optional Upgrades:

• Coil and Strut Assembly with new strut tops - SC45-004 - Strut tops
• Airbag Suspension Helper Kit for rear coils - Used for towing, so you can choose a more comfortable rear spring when you are not towing.

Important Notes for setting up your Vehicle Correctly:

• When selecting Springs to suit your lift, please Select Springs only to suit Current "CONSTANT" Loads Front and Rear.
• Towing Loads are not included in your Constant Load Calculations, as they are not "Constant" Loads.
• Please do not put Occasional Loads into your "Constant" Load determinations.
• Selecting a load rating that is too heavy for your setup will result in Poor Flex Off-Road, Compromised Suspension Travel & Rough Ride, and will cause damage to your new shock absorbers and other components by pushing them outside of their intended range.

Please Note:

• All lift heights stated are estimated lift heights, due to the large number of variables in each different vehicles setup and accessories.