Toyota Landcruiser 200 Series - Tough Dog 53mm Ralph Lift Kit - Preassembled Struts
Type: Landcruiser
Model: 200 Series GX - GXL - VX
Year: 11/2007 on
Suspension Type: Coil Spring Front / Coil Spring Rear
Front Lift: 40mm
Rear Lift: 20mm
Detail: 53mm Bore Shock
Front Preassembled Struts & Coils
The kit contains:
- 2x Tough Dog 53mm Ralph - Front Preassembled Strut & Coils
- 2x TDR1114 - Tough Dog 53mm Ralph Rear Shocks
- 2x Tough Dog Rear Coil Springs
Recommended Upgrades:
- 1x TDCA-004 - Upper Control Arms
- 1x TDAA-010 - Coil Insert Airbags
- 1x TDPR-200 - Adjustable Panhard Rod - Rear
Product Upgrades and Additions
Type: Landcruiser
Model: 200 Series GX - GXL - VX
Year: 11/2007 on
Suspension Type: Coil Spring Front / Coil Spring Rear
Front Lift: 40mm
Rear Lift: 20mm
Detail: 53mm Bore Shock
Front Preassembled Struts & Coils
Panhard Rod Rear
Adjustable panhard rods allow the axle to be re-centred under the vehicle after the height has been modified. Tough Dog panhard rods are bent from a single solid bar for strength, and are adjustable to cover a broad range of vehicle heights.
This Vehicle Part No: TDPR-200
Upper Control Arms
When an IFS vehicle is fitted with a suspension lift, the original caster and camber specifications are pushed outside the acceptable limit. The vehicle loses caster which makes the steering vague, and positive camber is introduced, which contributes to uneven and accelerated tyre wear. Tough Dog Upper Control arms can help get the maximum performance and lifediv from your suspension and steering components.
This Vehicle Part No: TDCA-004
Coil Insert Airbags
When carrying varying loads or heavy towing, Air Assist coil insert kits can help level off vehicles. By increasing the air pressure, the coil insert kit increases the effective spring rate and levels the vehicle. The high pressure bag is inserted inside the coil spring and assists the coil spring when necessary.
This Vehicle Part No: TDAA-010
Important Notes for setting up your Vehicle Correctly:
- When selecting Springs to suit your lift, please Select Springs only to suit Current "CONSTANT" Loads Front and Rear.
- Towing Loads are not included in your Constant Load Calculations, as they are not "Constant" Loads.
- Please do not put Occasional Loads into your "Constant" Load determinations.
- Selecting a load rating that is too heavy for your setup will result in Poor Flex Off-Road, Compromised Suspension Travel & Rough Ride, and will cause damage to your new shock absorbers and other components by pushing them outside of their intended range.
Please Note:
- All lift heights stated are estimated lift heights, due to the large number of variables in each different vehicles setup and accessories.