Superior Nitro Gas Twin Tube 3 Inch (75mm) Lift Kit Suitable For Toyota Hilux 2015 on (Kit) - SUP-NG-REVO3

    Superior Nitro Gas Twin Tube 3 Inch (75mm) Lift Kit Suitable For Toyota Hilux 2015 on (Kit) - SUP-NG-REVO3

    SUP-NG-REVO3

    Type: Hilux

    Model: N80 Revo

    Year: 2015 onwards

    Lift Height: 3 inch

    SKU: SUP-NG-REVO3

    Note: NOT SUITABLE FOR TOYOTA HILUX ROGUE AND SR5 CRUISER WIDE TRACK 2022 ONWARDS


    The kit contains:

    • 2 x Rear leaf springs
    • 2 x Front coil springs
    • 4 x U-bolts
    • 12 x Poly bushes
    • 2 x Greasable rear shackles
    • 2 x Front Superior Nitro Gas Twin Tube struts
    • 2 x Rear Superior Nitro Gas Twin Tube shocks
    • 2 x Strut Tops
    • 1 x Sway Bar Relocation Kit
    • 2 x Superior Engineering Upper Control Arms (UCA's)
    • 1 x Diff Drop Kit

    This kit comes with the front struts assembled with a coil of the selected spring rate, ready to install in your vehicle. Having the front struts shipped assembled means you don't require a coil compressor for the fitment of this kit.

    Customise your kit below:
    * Front Load Options
    * Rear Load Options
    Upgrade Cost: 0
    $4,953.00
    Tax included

    This item could be out of stock. If it is, we will contact you after your order is placed. Alternately, please contact us to check current stock levels.


    Quantity

    Please Note: Due to supply issues, the colour of the coil springs you receive may vary from the coils pictured. All coils used in Superior Engineering Kits are made from quality Australian manufacturers.

    Superior Engineering has put together a 3" inch Superior Nitro Gas lift kit Suitable For 2015 Toyota Hilux with Superior Nitro Gas rear shocks and front struts.

    This lift kit includes the following 4x4 accessories and parts:

    • 2 x Rear leaf springs
    • 2 x Front coil springs
    • 4 x U-bolts
    • 12 x Poly bushes
    • 2 x Greasable rear shackles
    • 2 x Front Superior Nitro Gas Twin Tube Struts
    • 2 x Rear Superior Nitro Gas Twin Tube Shocks
    • 2 x Strut Tops
    • 2 x Superior Engineering Upper Control Arms (UCA's)
    • 1 x Diff Drop Kit

    This kit comes with the front struts assembled with a coil of the selected spring rate, ready to install in your vehicle.
    Having the front struts shipped assembled means you don't require a coil compressor for the fitment of this kit.

    For warranty reasons, when fitting a lift kit you should always fill out a "Fitment Form".

    This kit also levels out the suspension by lifting the front higher than the rear. Generally, the rear will be lifted by 1" less to match the front and give a more even ride height.

    Warning: When lifting an IFS vehicle over 2" inches it will not drive or handle the same as a factory-height vehicle. Additional noise, wear, tear and maintenance can be expected. For more information on how this kit will apply to your vehicle please call one of our sales staff on (07) 5433 1411.

    NOTE: Superior IFS Lift Kits will generally lift the front the full amount but the rear will be brought up to match the front.
    In most cases, this means the rear will have a 1" lower lift then the front, this gives a more level ride height.

    SUP-NG-REVO3

    Data sheet

    Make
    Toyota
    Model
    Hilux
    Series
    N80 - Revo - 2015 onwards
    Brand
    Superior Engineering
    Product Type
    Full Lift Kit
    Lift Height
    75mm
    Related Products ( 16 other products in the same category )
    Powered by Trust.Reviews