Toyota Hilux LN/YN 105/106 (1979 to 11/1997) - Dobinsons Nitro Gas Lift Kit 2"

Dobinsons Spring & Suspension established in 1953, is largely based on Leaf and Coil Spring Manufacturing and the supply of Suspension Components. With several generations of family ownership and experiences, Dobinsons has become one of the leaders in the Spring Industry in Australia applying the years of knowledge into their products. 

The kit contains:

• 2x GS59-639 - Dobinsons Nitro Gas Front Shock absorbers
• 1x HIL-003-F LH - Dobinsons Front Left Leaf Spring
• 1x HIL-003-F RH - Dobinsons Front Right Leaf Spring
• 1x HIL-4+2-R LH - Dobinsons Rear Left Leaf Spring
• 1x HIL-4+2-R RH - Dobinsons Rear Right Leaf Spring
• 2x GS59-649 - Dobinsons Nitro Gas Rear Shock absorbers
• 1x UB59-437 - Dobinsons U Bolt
• 4x UB59-453-2 - Dobinsons U Bolts
• 2x UB59-667 - Dobinsons U Bolts
• 1x UB59-449-3 - Dobinsons U Bolts
• 2x SK59-001 - Shackle Kit
• 2x SK59-009 - Shackle Kit
• 4x SP59-005 - Shackle Pins
• 20x PB59-1530 - Dobinsons Polyurethane Bush
• 4x PB59-1532 - Dobinsons Polyurethane Bush

Leaf spring item codes may be different in your kit depending on the load options you select.

Important Notes for setting up your Vehicle Correctly:

• When selecting Springs to suit your lift, please Select Springs only to suit Current "CONSTANT" Loads Front and Rear.
• Towing Loads are not included in your Constant Load Calculations, as they are not "Constant" Loads.
• Please do not put Occasional Loads into your "Constant" Load determinations.
• Selecting a load rating that is too heavy for your setup will result in Poor Flex Off-Road, Compromised Suspension Travel & Rough Ride, and will cause damage to your new shock absorbers and other components by pushing them outside of their intended range.

Please Note:

• All lift heights stated are estimated lift heights, due to the large number of variables in each different vehicles setup and accessories.